QUICK PROGRAMMING GUIDE
Setting the Date and Time
1.
Turn the dial to the
CURRENT
TIME/DAY
position.
2.
Hours will be flashing. Press the
or
button to change the hour
shown on the display. Press the
to proceed to setting the minutes.
3.
Minutes will be flashing. Use the
or
button to change the minutes
shown on the display. Press the
to proceed to select AM, PM, or 24
hour time.
4.
The time will be displayed, and an
arrow will be flashing on AM. Press
the
or
buttons to select AM,
PM, or 24 hour. Press the
to
proceed to setting the day of the
week.
5.
MO
will be flashing, indicating the
first day of the week. Press the
or
to select the day of the week
(-E models are indicated by
numbers 1 through 7)
HUNTER EC-401-A Residential Irrigation Controller
Setting Watering Start Times
1.
Turn the dial to the
START
TIMES
position.
2.
The factory preset is set on
program A. If necessary, you can
select program B or C by
pressing the
button.
3.
Use the
or
button to
change the start time. (The start
times advance in 15 minute
increments).
4.
Press the
button to select the
next start time, or press for the
next program.
NOTE: One start time will activate all stations
sequentially in that program. This eliminates the
need to enter each station’s start time. Multiple start
times in a program can be used for separate
morning, afternoon, or evening watering cycles.
Installed by:
www.propertymaintenance.net.au
