6
1886
Installing the Motor Housing
Ceiling Bracket
Hanging Fan
Wiring
Motor Housing
Blades
Light
Remote
Troubleshooting
Installing the Blades:
Insert grommets found in the hardware bag into the
holes in the blades, then secure each blade to a blade iron
with screws found in the
hardware bag.
Repeat x5
Lightly attach the blade irons to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.
Assembling the Light
Installing the Bulb and Glass
1
STEP
2
STEP
Raise the motor housing up over the motor and ceiling
bracket. Turn the motor housing so the screw holes align
and the indentation in the housing locks into place with
the notch in the ceiling bracket.
The motor housing is
not secured until the next step is complete. Do not
leave unattended.
With a Phillips head screwdriver, install
the four motor housing screws found in
the
hardware bag. Tighten all four
screws securely.
x4
bag
Notch
Indentation
Motor Housing
Screw
x15
bag
Blade Screw
x15
bag
Grommet
Repeat x5
x10
bag
Blade Arm Screw
