MA005-01 • 07/24/13
1.888.830.1326
7
TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)
Installing the globe
(sold separately)- Position
the indentations in the outer rim of the globe
so that they line up with the tabs on the inside
surface of the light fixture rim. Carefully lift the
globe up inside the light fixture as far as it will
go. Rotate the globe in a clockwise direction
until it is held tightly in place by the four tabs.
Indentation
Tab
Installing the bulb
- connect the four-
pin connector to the four pins on the
bulb. Raise the bulb up and secure it to
the light kit using the bulb clamps.
Bulb Clamp
ON
Turn
Pow
er
Installing the pull chain pendant
-
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your
installation is complete!
5
7
6
8