MA005-01 • 07/24/13
1.888.830.1326
5
Installing the globe
(sold separately)-
Position the indentations in the outer rim of
the globe so that they line up with the tabs
on the inside surface of the light fixture
rim. Carefully lift the globe up inside the
light fixture as far as it will go. Rotate the
globe in a clockwise direction until it is held
tightly in place by the four tabs.
Installing the bulb
- connect the four-
pin connector to the four pins on the
bulb. Raise the bulb up and secure it to
the light kit using the bulb clamps.
ON
Turn
Pow
er
Installing the pull chain pendant
-
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your
installation is complete!
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
Bulb Clamp
5
7
Indentation
Tab
6
8