MAINTENANCE
This fan is permanently lubricated and
will not require additional lubrication (oil)
for the life of the fan.
This fan requires little maintenance
and contains no user serviceable parts.
TO CLEAN:
outlet. Wipe off excess dust
2. To ensure adequate air
circulation to the motor, keep
vents located at the rear of
the motor housing free from
dust accumulation. A vacuum
cleaner hose can be used to
clean these vents.
3. DO NOT immerse the fan in
water or any other liquid.
CLEANING GRILL AND BLADE:
1. Turn the fan off and unplug
from the electrical outlet.
2. Disassemble grills by carefully
removing the screw on the
3. Pull up the 4 clips from the rear
grill to remove the front grill.
4. Use a dry or slightly damp lint
free cloth to clean the fan.
5. Use a soft, slightly damp cloth
to wipe the remaining fan parts.
6. DO NOT allow water or any
other liquid to get into the motor
housing or base.
7. Reassemble the fan after
blades and grills have dried
completely. Align the grills,
replace the screw and clips.
8. DO NOT plug fan into an
electrical outlet until it has been
fully reassembled.
Front
Grill
Base
Clip
Screw
Power/Speed
Control Switch
Blade
Screw
Back
Grill
Handle
Oscilation
Knob
Motor
Housing
Up/Down
Adjustment
Screw
9
Figure 15
is needed.
bottom of the grill. See Figure15.
1. Before cleaning, turn the fan
with a lintfree cloth.
off and unplug from electrical
61809-01 R20211020
