background image

NOTE: It is best to have someone hold 
the box while lifting the fan and protective 
packaging out of the carton. Make sure all 
shipping materials are removed from fan 
before operating.

Note: One of the grill mounting screws
will have a star washer for grounding
purpose. The other 3 screws will not
have a washer.

UNPACKING

6

As you unpack the fan, save the carton 
and packing materials in case you want to 
move or ship the unit in the future. 
Carefully remove all items from the box.

1. Remove the four rear grill mounting 
    screws from the motor housing. Figure 6.

2. Make sure the rear grill is positioned so 
    that four of the grill lines are completely 
    between the top tabs, Figure 7. Then 
    place the rear grill against the motor 
    housing, and line up the four tabs on the 
    back of the grill to the four screw holes 
    on the front of the motor.

3. To attach the rear grill to the motor 
    housing, partially install the four grill 
    mounting screws. Tighten all four 
    screws. Figure 8.

4. Loosen the screw on the back of the 
    blade assembly. Figure 9a. Slide the 
    blade assembly onto the motor shaft. 
    Figure 9.                 

5. Tighten the screw on the blade assembly 
    to secure it to the motor. Make sure that 
    the end of the screw is positioned within 
    the notch on the shaft.  Figure 10.

GRILL ASSEMBLY:

Figure 6

Grill 

Mounting 

Screw

Figure 7

Grill Lines

Top Tabs

1 2 3 4

Figure 8

Caution: Be sure to tighten the screw on 
the back of the fan blade to the flat part
of the motor shaft.

61809-01   R20211020

Summary of Contents for 90600













Reviews: