background image

4

  47009-01  02/16/2012

SAFETY AND WARNINGS (CONTINUED)

9. 

  To disconnect, grip plug and pull from wall outlet. 

NEVER

 pull directly on cord.

10. 

This product is intended for residential use only and not for commercial or industrial use.

11. 

DO NOT

 operate fan in the presence of explosive and/or flammable fumes, or freezing temperatures.

12. 

This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. 

DO NOT

     

  attempt to defeat the purpose of this safely feature.

13. 

DO NOT

 use an extension cord to plug this unit into an outlet.

14. 

This fan is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This 

device provides additional protection from the risk of electric shock. DO NOT attempt to disconnect or bypass 

this safety feature.

15. 

DO NOT

 run the fan for extended periods of time unattended.

16. 

This fan is intended for outdoor use.

17. 

DO NOT 

attempt to mount or hang this fan from a wall or ceiling.

18. 

Exposure to sunlight for extended periods of time may fade the appearance of this product.

UNPACKING

As you unpack the fan, save the carton and packing materials in case you want to move or ship the unit in the future. 
Carefully remove all items from the box.

NOTE:

 It is best to have someone hold the box while you lift the fan and the protective packaging out of the carton. 

Make sure all shipping materials are removed from fan before operating.

Summary of Contents for 90398













Reviews: