3
42922-0 2/29/06
7) Never place a switch where it can be reached from a tub or shower. Do not install this appliance in
a tub or shower enclosure.
8) Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction codes and standards.
9) When cutting or drilling into wall(s) or ceiling, do not damage electrical wiring or other hidden
utilities.
0) Do not install this appliance in a wall. This appliance is designed for installation in ceilings up to a
2/2 pitch (45 degrees). Ductwork must point upward.
) Ducted fans/heaters must always be vented to the outdoors. Keep ducting as short and as
straight as possible.
2) Extreme caution is necessary when any heater is used by or near children or invalids and when-
ever the heater is left operating and unattended.
3) To avoid motor bearing damage and noisy/unbalanced blower wheel, keep drywall spray, con-
struction dust, etc. off power unit.
4) Read specification label on product for further information and requirements.
5) Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the heater.
6) Do not use this appliance with a dimmer switch or a fan speed controller.
7) To prevent a possible fire, do not block air intakes or exhaust in any manner.
8) This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep flam-
mable liquids, and combustible materials such as furniture, bedding, pillows, papers, clothes, and cur-
tains at least 3 feet (0.9 m) from the front of the heater and keep them away from the side and rear.
Summary of Contents for 80500
Page 20: ...42922 01 12 29 06 20 ...
