43044-01 03/05/2008
12
Section D - Existing Construction – accessible from below
Remove one of the wiring access slugs on the top of the
housing. Use a second wiring access plug if needed.
EXISTING FAN
D3
Remove an existing fan and check to make sure the opening
is large enough to accommodate the new fan housing. If
there is no existing fan choose an appropriate location to
make an 11” x 9 5/8” opening.
Remove the mounting rail brackets.
3”
D4
Run the power supply wire through the strain relief, leaving 3”
between the end of the wire and the strain relief. Tighten the
strain relief around the wire.
D1
D2
Summary of Contents for 43044-01
Page 18: ...43044 01 03 05 2008 18 ...