44114-01 • 03/06/2012
8
Figure 7
Figure 8
Maintenance (continued)
Figure 9
CLEANING THE PRE-FILTER:
CLEANING THE FILTER:
1. Turn the air purifier off and disconnect from the
wall outlet.
2. Remove the
rear grill on the back of the unit by
gently pulling the
removal tabs away from the unit
and lift the
rear grill away. Figure 7.
3. Gently remove the
pre-filter from the rear grill, by
carefully removing it from the
filter supports that
secure it to the
rear grill. Figure 8.
4. Check the side of the
pre-filter facing the rear grill
for particle coverage.
5. If the
pre-filter needs to be cleaned, it may be
submerged in warm soapy water to clean. Gently lift
and submerge the
pre-filter several times to clean.
6. When complete, rinse the
pre-filter with warm
water and allow to dry completely.
Note:
Wet parts placed into the unit can cause
damage to the filters and or the motor of the air purifier
.
7. Reinstall the
pre-filter.
8. Replace the rear grill. The unit is now ready for
normal operation.
1. Turn the air purifier off and disconnect from the outlet.
2. Remove the
rear grill on the back of the unit by
gently pulling the
removal tabs away from the unit
and lift the
rear grill away. Figure 7.
3. Remove the
filter from the unit. Note the directional
arrow printed on the side of the filter. The
filter will
be reinstalled with the same orientation. Figure 9.
4. With a vacuum cleaner and upholstery brush
attachment, clean the filter until all particles are
removed. Do not use water or liquids to clean the
HEPA filter.
5. Reinstall the
filter.
6. Replace the
rear grill. The unit is now ready for
normal operation.
Rear Grill
Filter
Supports
Removal Tab
