background image

15

45086-01  •  09/22/2011  •  Hunter Fan Company

In warm weather

, use 

downward air flow pattern

In cold weather

, use upward 

 

air flow pattern

10-1.  Turn on electrical power to the fan.
10-2.  The remote controls power to the fan. The fan has four settings 

in sequence: High, Medium, Low and Off.

10-3.  Ceiling fans work best by blowing air downward 

(counterclockwise blade rotation) in warm weather to cool the 
room with a direct breeze. In winter, having the fan draw air 
upward (clockwise blade rotation) will distribute the warmer air 
trapped at the ceiling around the room without causing a draft. 

10-4.  For cleaning finishes, use a soft brush or lint-free cloth to 

prevent scratching. A vacuum cleaner brush nozzle can remove 
heavier dust. Remove surface smudges or accumulated dirt and 
dust using a mild detergent and a slightly dampened cloth. You 
may use an artistic agent, but never abrasive cleaning agents as 
they will damage the finish.

10-5.  Clean wood finish blades with a furniture polishing cloth. 

Occasionally, apply a light coat of furniture polish for added 
protection and beauty. Clean painted and high-gloss blades in 
the same manner as the fan finish.

To Change Airflow Direction

Press the reversing switch on the remote 
while the fan is running.

10 • Operating and Cleaning Your Ceiling Fan

Summary of Contents for 28789

















Reviews: