6
JINTDBW09 Rev B 05/03/15
Removing Internal Components
All internal components must be removed prior
to fitting the stove. This will make handling the
stove easier; allow access to fixings and the flue
outlet; as well as protect the internal
components from damage during the installation
process.
1.
Open the door(s) and remove the ashpan.
2.
Remove the fuel retainer by lifting
upwards of its supports and remove from
firebox.
3.
Remove the fuel retainer support (front
plate) by lifting the fuel retainer support
clear from its locating slots. Then remove.
4.
Remove the bricks by sliding forward so
they are clear of their supports and tilting
the bottom edge into the fire box.
5.
Remove the grate bars by lifting the front
up off the cam bar and sliding forward off
the rear grate support and lifting out of
the firebox. Repeat with remaining grate
bars.
6.
Remove cam bar by removing the two M6
x 50mm screws form the cam bar cover.
