3
4
ASSEMBLY STEPS
Driving wheel
Spare wheel
Normal wheel
Hint: An extra spanner has been provided to hold the Ø10 locknut on the other side
of the front axle while tightening the locknut on the other side.
● Fit the gear box onto the rear
axle from the left side (Standing at the
rear of the vehicle body). And make the
motor on the gear box pass through the
hole in the vehicle body.
● Fit the driving wheel onto the rear
axle, keep it match with the gear box.
● Fit a Ø12 washer onto the rear axle.
● Fit a Ø10 locknut to the end of the
rear axle.
Driving wheel
Ø10
Locknut
Ø10
Locknut
Gear box
Rear axle
Ø12
Washer
Bushing
Front axle
Normal wheel
Ø12
Washer
Ø12
Washer
● Remove the parts from the front axle.
● Fit a
Ø
12 washer onto the axle.
● Fit a bushing onto the axle.
● Fit a normal wheel onto the axle, make
the wheel match with the bushing.
● Fit a
Ø
12 washer onto the axle.
● Tighten the
Ø
10 locknut with a spanner.
(Do not over tighten)
● Repeat for the other wheel(s).
FOR ANY PRODUCT ENQUIRIES OR ISSUES PLEASE CONTACT HUNTER PRODUCTS
AT WWW.ELECTRICRIDEON.COM.AU OR TOLL FREE HELP LINE 1800 224 094.
-6-
