16 |
P a g e
THROTTLE INSPECTION and ADJUSTMENT
[Throttle Cable Inspection]
Check the throttle is fully opening and closing smoothly in all steering positions. Check that the
Throttle Cable between the Throttle G rip and the Fuel Injection Unit is properly positioned and
not kinked or restricted. If the cable is twisted or damage, replace. If the cable is incorrectly
position, adjust accordingly. If the cable is twisted or damaged, replace.
[Throttle Adjustment]
Free-play in rotating the Throttle Grip should be between 2 to 4 mm. If necessary, unscrew the
Lock Nut and turn the Adjusting Nut to achieve the correct amount of free-play. If there is
insufficient adjustment, you can also adjust the Adjusting Nuts at the Throttle Cable Locator at
the Fuel Injection unit.
CLUTCH ADJUSTMENT
Free play at the tip of the Clutch Lever (on the left side of the Handlebars) should be 10 to 15
mm. If adjustment is necessary, unscrew the Lock Nut (1) at the Clutch Cable Locator (2) on the
crank case and adjust the Adjustment Nut (3) accordingly. Turn clockwise to decrease the free
play or counter clockwise to increase the free play. Clutch adjustment can also be achieved by
using the adjusting the Adjustment Adaptor (4) at the base of the Clutch Lever.
