Step 7. Additional actions
7.1. Operate a blind
Operating a blind or shade is product speci
fi
c. Each product has its own unique way of moving up or down, moving left or
right, tilting its vanes, moving quickly/slowly up or down etc.
Press and hold
the
stop
button for 6 seconds.
Keep pressing until the remote lights start blinking.
6.3
Keep
the Remote within 50cm from the Repeater and
press
the
stop
button.
The Repeater light will stop blinking and turns off.
6.4
The Repeater has been added to your Powerview® network.
Note
As an example, a
PowerView® roller blind
will be used in the next chapters to demonstrate the procedures explained.
The same principle is valid for all PowerView® blinds or shades.
MANUAL
Page 13 of 23
version: 1.1