Hub led behaviour
Step 6. Install Repeaters
Installation of a Repeater is necessary when your shade is not responding to a command from your Remote control or
App. Preferably put the Repeater halfway between the unresponsive shade and the Hub/Remote control location. The
Repeater can be connected to the existing PowerView® Network using the PowerView® App (follow in App instructions),
or a PowerView® Remote.
You can now start discovering blinds.
Hub status
LED behaviour
Power On
Solid Aqua
Bootup
Blinking Aqua
Downloading & applying
fi
rmware update
Solid Amber
Ready to connect to a wi
fi
network
Solid Magenta
Ready to join a PowerView network
Blinking Amber
Connect to a PowerView network. Normal operation
Solid Blue
Transmitting a PowerView signal
Flashing Blue
Secondary hub. Connected to PowerView network. Normal operation
Solid Green
Secondary hub. Transmitting a PowerView network.
Flashing green
No IP address
Solid red
MANUAL
Page 11 of 23
version: 1.1
