8
Installation
Attach the Magnetic Hold-Down Brackets (Optional)
Lower the shading, keeping the vanes closed.
Place the magnetic hold-down bracket onto the bottom rail just inside
the end cap, oriented as shown.
Hold the bracket while opening and closing the vanes. (It may be
necessary to have someone assist you.) Adjust the bracket to the best
overall position.
Mark the screw location using the mounting options shown below.
The screw should be placed in the middle of the channel. This will
allow for adjustment.
Drill the screw holes using a
3
/
32
" drill bit.
IMPORTANT:
Use drywall anchors when mounting into drywall.
Attach the hold-down brackets to the mounting surface using
the screws provided.
If necessary, adjust bracket height by loosening the screw and
sliding the bracket up or down.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust bracket
height by
loosening the
screw and sliding
the bracket up or
down.
INSTALLATION
