CARE
9
Removing the Shade (If Necessary)
■
Start at the bottom of the front channel, pull the channel to separate from the mounting
channel.
■
Repeat for opposite side.
■
Lower the shade approximately 4".
■
While holding the headrail, push
back on the bottom tab of the
installation bracket with a
flat blade screwdriver to release
the bottom edge of the headrail.
■
After releasing the bottom edge,
roll the back of the headrail
down and out from the bracket.
Removing the Rear Channels (If Necessary)
■
After removing the front channels and the shade, grasp the corner of the rear channel and
peel in wards. If necessary, use a wide flat blade screw driver or 1" putty knife between
the mounting channel and the rear channel.
■
Repeat for opposite side.
Headrail
Bracket
Back of
Shade
Remove
Bottom
Tab
