Attach the End Mount Brackets to the Window Jamb
■
Fully lower the shade.
■
Position the fully lowered shade in the window.
■
Gently push the fabric away from the end mount brackets to allow access to the
screw holes.
■
Mark the screw hole locations.
IMPORTANT:
Check that the front edge of the shade is level and aligned.
■
Remove the shade from the window.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Install the shade by attaching the end mount brackets, using the screws provided.
Proceed to “Install the Arch Trim” on page 7.
Install the Shade
Standard Brackets
■
Position the shade so the front fabric faces you.
■
Slip the rail into the installation brackets so the
front of the bracket slides under the front groove
on the bottom of the rail.
■
Gently roll the back of the rail down and push back
to snap into place.
■
Tighten the tab screw snugly. Do not overtighten.
Swivel Brackets (Optional)
■
Place the swivel brackets in the open position.
■
Place the rail against the back of the swivel brackets.
■
Rotate the swivel arm to snap the locking tab under
the rail.
■
The shade is locked when the push tab is against the rail.
Tab
Screw
Rail
Tab
Screw
Rail
Bracket
In Locked
Position
Tab
Bracket
In Open
Position
Bracket
In Open
Position
Bracket
In Locked
Position
Locking Tab
Locking Tab
Tab
INSTALLATION
6
