■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
■
Attach the installation brackets using the screws provided.
➤
Check that the mounting surface is level and the brackets are aligned. If mounting to a
heavily textured surface, shim the brackets, if needed.
■
For a shade over 30":
Use the tab screw to mount the
center bracket to the pre-drilled hole in the bottom sill.
Proceed to “Install the Shade” on page 6.
Mount Installation Brackets — End Mount
Install End Mount Brackets onto the Headrail
■
Slightly remove the end caps
from the headrail. Do not
remove them all the way.
■
Insert the short end of the
specialty end mount brackets
over each of the end caps
and under the small fabric
channels in the headrail.
Center
Point
Center
Point
Tab
Screw
Small Fabric Channels
Long
End
Short
End
(
3
/
4
" pleat rail shown,
3
/
8
" pleat similar)
Duette
®
Headrail
Specialty End
Mount Bracket
End Mount
Bracket
Rail
End Cap
INSTALLATION
5
