INSTALLATION
10
Attach the Magnetic Hold-Down Brackets (Optional)
■
Lower the shading, keeping the vanes closed.
■
Place the magnetic hold-down bracket onto the bottom rail just inside
the end cap, oriented as shown.
■
Hold the bracket while opening and closing the vanes (it may be
necessary to have someone assist you). Adjust the bracket to the best
overall position.
■
Mark the screw location using the mounting options shown below.
➤
The screw should be placed in the middle of the channel. This will
allow for adjustment.
■
Drill the screw holes using a
3
/
32
" drill bit.
Important:
Use drywall anchors when mounting into drywall.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust bracket height by loosening the screw and
sliding the bracket up or down.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust bracket
height by
loosening the
screw and sliding
the bracket up or
down.
