INSTALLATION
8
Install the Shading
■
Peel back the protective
covering from the top of the
fabric-covered headrail. Leave
the rest of the protective
covering on the front of the
headrail.
■
Position the shading so that the front faces you.
■
Slide the headrail into the installation brackets so the edge of the headrail is between the
lever and the bracket, as shown.
■
Firmly push the headrail into each bracket until it clicks and the lever snaps to the right side
of the bracket.
Important:
Carefully pull on the headrail at each bracket to ensure it is installed securely.
■
Completely remove the protective covering from the fabric covered headrail.
Attach the Universal Cord Tensioner (UCT) for EasyRise
™
Only
Important:
Before you proceed, you
must
first slide the cord tensioner to the
bottom of the cord loop.
■
Insert a small screwdriver, punch, or awl through the
screw hole at the bottom of the cord tensioner.
■
Move the screw hole down to the indicator line to
release the safety mechanism.
■
Slide the cord tensioner down to the bottom of the
cord loop.
■
Attach the cord tensioner according to the
instructions provided with the
Universal Cord
Tensioner Installation Kit
.
WarnInG:
It is imperative that the cord tensioner be properly secured to
the wall or window frame to reduce children’s access to the cord loop.
Young children can strangle in cord loops. They can also wrap cords around
their necks and strangle.
CautIon:
The shade will not operate properly unless the cord tensioner
is secured. A
Universal Cord Tensioner Installation Kit
has been included
with your shading. Follow the instructions in the kit to correctly secure the
cord tensioner.
Headrail
Installation
Bracket
Lever
Slide the Headrail
Between the Lever
and the Bracket.
Screw
Hole
Indicator
Line
