INSTALLATION
6
■
Center the shade in the window and make a mark on the end of the clutch side of
the shade.
■
Measure the width of the shade from the clutch to end of the tab.
➤
Measure and mark the width of the shade from the previously made mark.
■
Place the outside edge of the clutch-side bracket
on the fi rst mark, then mark the location of the
screw holes.
➤
A 2¾" fl at vertical surface is required to mount
the brackets.
■
Place the rotator-side bracket centered on the second
mark, then mark the location of the screw holes.
IMPORTANT:
The front edges of the installation
brackets must be level and aligned to each other.
■
Use a
3
∕
32
" drill bit to drill holes for the screws.
IMPORTANT:
If you are fastening the installation brackets to drywall, be sure to use wall
anchors and follow the instructions provided with the anchors. (Anchors not provided.)
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
(Shims not provided.)
■
Use the hex head screws provided to fasten the installation brackets to the mounting
surface.
Clutch
Measure width of the shade
from the clutch to the end
of the tab.
Use this measurement
to mark the location
for the rotator-side
bracket.
Previously
Made Mark
Tab
1
2
Clutch-Side
Bracket
Rotator-Side
Bracket
