2
GETTING STARTED
Thank you for purchasing Hunter Douglas Alustra
®
Woven Textures
®
Roller Shades. With proper
installation, operation, and care, your new shades will provide years of beauty and performance.
Please thoroughly review this instruction booklet before beginning the installation.
Check the packaging to be sure you have all the components needed to install your shade. Keep
the packaging until the shades perform to your satisfaction.
Tools and Fasteners Needed
■
Flat blade and Phillips screwdriver
■
Level
■
Measuring tape and pencil
■
Power drill,
3
∕
32
" drill bit,
and a
1
∕
4
" hex driver
In addition, you will need fasteners designed to work with your specifi c mounting surface(s).
■
#6 Hex Head Screws (Provided).
Two 1
1
∕
2
" screws are provided per
installation bracket.
■
Longer Hex Head Screws (Not Provided).
If using spacer blocks,
use a #6 screw long enough for a secure attachment.
■
Drywall Anchor (Not Provided).
Use drywall anchors when mounting into drywall.
IMPORTANT:
Do not remove the paper banding used to prevent shade from unrolling
prematurely until after the shade is installed.
#6 x 1½"
Hex Head Screw
(Provided)
