Hunt HTP-T800, User Manual

Page: 14 / 58

HTP-T800 User Manual
-13-
6. Checking Operating
Once the power is supplied to the camera, it will start booting. The system will boot up to an operating
mode after approximately 40-60 seconds. The green LED on the Ethernet port will flash indicating the
system is ready.
Software provided on the disc called True Manager allows you to check the IP address and other
network details of the camera. Please refer to the True Manager manual for instructions on how to find
the IP address of the camera and if required changing it.
”
Encoder LED Display
Above LED status display shows that neither camera is connected nor a decoder is connected. Once
the encoder is connected to a decoder, color of link LED will light in green color and the LED will blink
as video or audio transmissions occur.
”
Decoder LED Display
Above LED status display shows that the encoder has started without connecting to an encoder. Once
an encoder is connected, the color of link LED will be changed to green and the LED will blink as
video or audio data transmissions occur.
PWR STATUS LINK
Red Green
Blinking
DATA
OFF
PWR STATUS LINK DATA
OFF
Red
Green
Blinking
OFF
Red
Blinking