User Manual of Network Fisheye Camera
55
5.6.1.
5.
Check the checkbox to select the linkage method taken for the tamper-proof.
Audible warning, notify surveillance center, send email and trigger alarm output are
selectable. Please refer to
Task 3 Set the Alarm Actions for Motion Detection
in
Section 5.6.1.
6.
Click
to save the settings.
5.6.3
Configuring Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2.
Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
Figure 5-36
Alarm Input Settings
3.
Click
Edit
to set the arming schedule for the alarm input. Refer to
Task 2: Set the
Arming Schedule for Motion Detection
in
Section 5.6.1.
4.
Check the checkbox to select the linkage method taken for the alarm input. Refer
to
Task 3: Set the Alarm Actions for Motion Detection
in
Section 5.6.1.
5.
You can also choose the PTZ linking for the alarm input if your camera is
