Install&User’s
Guide
33
All Sensor
It is used when setting for all sensors and set Off, or Normal Open (N.O.) / Normal Close
(N.C.) type.
(1)
Select All and set type.
Each sensor
It is used when setting for each sensor and set selecting each sensor.
(1)
Select sensor and press [Enter] button.
(2)
Select sensor that user want set and set type.
(3)
Press [ESC] after finishing value setting.
2.3.3.2
Connecting relay and stting
Specification
In order to run relay output of DVR normally, the following conditions are required.
SPEC
Output Ch.
4EA relay outputs
Output type
Dry contact
Connecting type
Connect the trimmed wire to terminal block
Performance
DC 30V
1A
AC 125V
0.5A
