Hunt Electronic HVR-04, Installation Manual

Page: 48 / 60

(2) HDD Type at Disk Manager
[R] HDD for recording that is fully formatted
[V] [V] Connected and formatted as HVR-04’s file system
If using ‘Add used’ command, it will be changed to [R]. There is no need to reformat.
[F] Connected but not available file system. After using ‘Add’, need to format for making as
[R]. Or displays FAT32 file system connecting for backup
[C] External CD-Recorder
[X] HDD cable is not connected properly or HDD has problem, in this case you need to run
“Confirm Removed” to delete it in the list.
If there is [X] in the disk list, buzzer will be going on until disk manager is closed.
IntA Internal Primary IDE Channel Master HDD
IntB Internal Secondary IDE Channel Master HDD
Ext As for External HDD, the order in the list can be changed according to order for
recognition.
(3) HDD Managing Command
Add Add HDD for recording. “Alarm Partition” menu will be activated when adding
it. “Alarm Partition” works on dividing one disk by 2 part (Normal Recording
and Alarm Recording.
Add Used “Add a HDD” that has been used and formatted. There is no need to reformat, but
it can be used only if adding HDD for primary disk.
Remove Remove current HDD. HDD can be reused without data loss by the
‘Add Used’ command.
Confirm Removed Used when a removed HDD is still listed. ALL DATA WILL BE LOST!.
FAT32 Format : Use when connect to the external HDD
Format the partition of below 250GB to copy/backup by FAT32 file system.
It is necessary to create partition by using Disk manager on PC for this work.
In case the size is over 250GB, format each partition by FAT32 file system after
creating multiple partitions smaller than 250GB.
48