Hunt Electronic HVR-04, Installation Manual

Page: 17 / 60

(4) Select “Remote Control ID,” and press the [ENETR] button.
(5) Select a value using the [ / ] ◀ ▶ buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
<Note> Remote Control ID
Up to 16 HVR-04s can be controlled with a single remote controller.
6.3. Selecting HVR-04
If several HVR-04s are set with unique ID numbers, they can be controlled with one remote controller. To
select a specific HVR-04, press the ID button of remote controller repeatedly until the 8 LEDs on the
front of the HVR-04 light up and a buzzer sounds for about 2 seconds.
<Note>
Because remote controller ID is sixteen, HVR-04 will correspond.
6.4. Operable range of remote controller
17