44
If the testing fails, check the sharing setting of your location folder. The folder
properties must be
shared
and the permissions must be
Full Control
.
Wireless Setting (Optional)
(Support 802.11 b/g/n)
Set up the IP camera via wireless network. First, connect the camera with
Ethernet cable. Remove the Ethernet cable after finishing & saving the wireless
settings. The IP address is the same under both wireless and wired network. But,
if the Ethernet cable is plugged in the camera, the IP camera will use it to link to
the Internet instead of the wireless router.
Status of Networks in Wireless Setting
The camera scans and shows the
SSID
,
Mode
,
Security
, and
Signal Strength
of
