Hundure RAC-510PE, Hardware Manual

Page: 22 / 55

5.2 Function Settings
To enter command mode, master code input is required. Kindly ensure the safe keep of
the code to prevent unauthorized modification on the settings.
Upon entering command mode:
z Controller beeps five times and waits for the command input.
z PWR LED flashes red light
z After entering command, controller beeps once. Input the parameter settings for
the command.
HUNDURE
22 RAC-510/511PE Hardware manual
NOTE: Command Code 93 clears the entire memory and deletes all card nos. Kindly take
precaution before doing this operation.