35
Upper Range
(Advanced: Sonar, Split Sonar and Big Digits Views Only)
Upper Range sets the shallowest depth range that will be displayed on the Sonar, Split Sonar and
Big Digits Views. The Upper Range menu choice is available when User Mode is set to Advanced
(see
Setup Menu Tab: User Mode
) and can only be accessed from the Sonar, Split Sonar and Big
Digits Views. Upper Range is often used with Lower Range.
NOTE
: A minimum distance of 10 feet will be maintained between the Upper and Lower Range
regardless of the manual settings entered.
To adjust the Upper Range:
1. Make sure you are in Advanced Mode, then highlight Upper Range on the Sonar X-Press
TM
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Upper Range
setting. (0 to 1490 feet or 0 to 497 meters
[International Models Only]
, Default = 0)
For example, if you are only interested in the area between 20 and 50 feet deep, you should
set the Upper Depth Range to 20 and the Lower Depth Range to 50. The Sonar View will
then show the 30 foot area between 20 and 50, and will not show the surface or the
bottom (assuming the bottom is deeper than 50 feet), and will show greater detail for that
area between 20 and 50 feet.
Summary of Contents for Matrix 97
Page 86: ...80 Notes...
Page 87: ...81 Notes...
