Humminbird HDR 650 Installation And Operation Manual Download Page 44 | Manualshive

Page: 44 / 48

background image

Humminbird® Service Policy

Even though you'll probably never need to take advantage of our incredible
service policy, it's good to know that we back our products this confidently. We
do it because you deserve the best. We will make every effort to repair your unit
within three business days from the receipt of your unit at our factory. This does
not include shipping time to and from our factory. Units received on Friday are
typically shipped by the following Wednesday, units received Monday are
typically shipped by Thursday, etc.

All repair work is performed by factory-trained technicians to meet exacting
factory specifications. Factory-serviced units go through the same rigorous
testing and quality control inspections as new production units.

After the original warranty period, a standard flat rate service charge will be
assessed for each repair (physical damage and missing parts are not included).
Any repairs made after the original warranty will be warranted for an additional
90 days after service has been performed by our factory technicians. You can
contact our Customer Resource Center or visit our web site to verify the flat rate
repair fee for your product (visit the Product Support section):

http://www.humminbird.com

We reserve the right to deem any product unserviceable when replacement parts
are no longer available or impossible to obtain. This Service Policy is valid in the
United States only. This applies only to Humminbird® products returned to our
factory in Eufaula, Alabama. This Service Policy is subject to change without notice.

DOMESTIC (USA) CUSTOMERS:

PLEASE DO NOT RETURN THIS PRODUCT TO STORE FOR SERVICE

For all technical issues please call

1-800-633-1468

or visit

www.humminbird.com

, click

SUPPORT.

Please reference product serial number and

model number when contacting Humminbird®.

40

Warranty and Service Policy

«
...
42
43
44
45
46
...
»

Summary of Contents for HDR 650

















































Reviews:

No comments

Related manuals for HDR 650

Brand: Interphase Pages: 16

Brand: Interphase Pages: 18

Brand: Interphase Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands