Humminbird AIS 100 Installation And Operaion Manual Download Page 34

Page: 34 / 84

Installation

Page 32

4.1 What’s in the box?

Figure 33 shows the items included with your AIS transceiver purchase. The following section gives a brief
overview of each item. Please ensure all items are present and if any of the items are missing please contact
your dealer.

Figure 33 What’s in the box

●

AIS transceiver

The main transceiver and display.

●

Data cable

A 1m (3.3ft) long, 50 way data cable to connect the transceiver serial data ports to the junction box.

●

Junction box

Provides screw terminals for the data connections to ships sensors and display systems.

●

Power cable

A 2m (6.6ft) long power cable to supply the transceiver. The power cable also include alarm output

connections.

●

Trunnion bracket

Bracket for mounting the transceiver above a flat surface (e.g., on top of an instrument panel).

●

Panel mount brackets

Clamp brackets used when mounting the transceiver through a panel (flush mount).

●

Fixing screws

Eight fixing screws are provided for mounting the transceiver (when using the trunnion bracket) and

the junction box.

●

User and installation manual

This document - please read thoroughly before attempting to install and commission the transceiver.

●

Quick start guide

The quick start guide gives a handy one page reference for the installation process.

●

GNSS antenna

A GNSS antenna for the internal GNSS receiver supplied with 10m of co-axial cable.

●

Support tools CD

Software tools for configuration of the AIS transceiver and this user manual in other languages.

●

Mounting template

Template for cutting an aperture when panel mounting the transceiver.

Product

anual

Mounting te

plate

Data cable

Power cable

Transceiver

Trunnion bracket

Panel

ount brackets

Junction box

Quick

installation

guide

Screws

GNSS antenna

Quick

operation

guide

Summary of Contents for AIS 100





















































































Search results

Summary of Contents for AIS 100

Reviews:

Brands by name

Popular brands

Humminbird AIS 100, Installation And Operaion Manual

Search results

Summary of Contents for AIS 100

Reviews:

Brands by name

Popular brands