Humminbird 717 Operation Manual Download Page 68

Page: 68 / 96

Units - Speed

(with Temp/Speed or GPS receiver)

Units - Speed

selects the units of measure for speed-related readouts, and will

appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if a GPS Receiver is connected.

To change the Units - Speed setting:

1. Highlight Units - Speed on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units -

Speed setting. (kph

[International Models only]

, mph, kts, Default = kph

for International models and mph for Domestic models)

User Mode

User Mode

sets the menu system to either Normal or

Advanced. When set to Normal (default setting), only the basic menu options
are shown. When set to Advanced, additional menu choices are available.

To change the User Mode setting:

1. Highlight User Mode on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User

Mode setting. (Normal, Advanced, Default = Normal)

Language

(International only)

Language

selects the display language for menus.

International Models only.

To change the Language setting:

1. Highlight Language on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the

Language setting. (Default = English)

531524-1_A - 717 & 727 Man_Eng.qxp 9/30/2006 7:24 PM Page 68

Summary of Contents for 717

































































































Search results

Summary of Contents for 717

Reviews:

Related manuals for 717

Brands by name

Popular brands

Humminbird 717, Operation Manual

Search results

Summary of Contents for 717

Reviews:

Related manuals for 717

Brands by name

Popular brands