Humminbird 586C HD Operation Manual Download | Manualshive

Page: 3 / 96

background image

WEEE compliance may not be required in your location for electrical & electronic equipment
(EEE),  nor  may  it  be  required  for  EEE  designed  and  intended  as  fixed  or  temporary
installation  in  transportation  vehicles  such  as  automobiles,  aircraft,  and  boats.  In  some
European Union member states, these vehicles are considered outside of the scope of the
Directive,  and  EEE  for  those  applications  can  be  considered  excluded  from  the  WEEE
Directive requirement.

This  symbol  (WEEE  wheelie  bin)  on  product  indicates  the  product  must  not  be
disposed of with other household refuse.  It must be disposed of and collected for
recycling and recovery of waste EEE. Humminbird® will mark all EEE products in
accordance  with  the  WEEE  Directive.  It  is  our  goal  to  comply  in  the  collection,

treatment, recovery, and environmentally sound disposal of those products; however, these
requirements do vary within European Union member states. For more information about
where you should dispose of your waste equipment for recycling and recovery and/or your
European Union member state requirements, please contact your dealer or distributor from
which your product was purchased.

ROHS STATEMENT:

Product designed and intended as a fixed installation or part of a

system in a vessel may be considered beyond the scope of Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.

500 Series

™

, Down Imaging™, DualBeam PLUS™, Fish ID+™, Humminbird®, RTS

™

,

RTS Window

™

, Structure ID®, SwitchFire

™

, WhiteLine

™

, and X-Press™ Menu are trademarked

by or registered trademarks of Humminbird®.

© 2010 Humminbird®, Eufaula AL, USA. All rights reserved.

ATTENTION INTERNATIONAL CUSTOMERS:

Products sold in the U.S. are not

intended for use in the international market. Humminbird® international units provide
international features and are designed to meet country and regional regulations.
Languages, maps, time zones, units of measurement, and warranty are examples of
features that are customized for Humminbird® international units purchased through
our authorized international distributors.

To obtain a list of authorized international distributors, please visit our Web site at

humminbird.com

or contact our Customer Resource Center at

(334) 687-6613

.

«
1
2
3
4
5
...
»

Summary of Contents for 586C HD

































































































Reviews:

No comments

Related manuals for 586C HD

Brand: Standard Horizon Pages: 32

Brand: Garmin Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands