Humminbird 581i Combo Operation Manual Download Page 64

Page: 64 / 109

Waypoint [Name]

(Only with an active cursor on a waypoint)

Settings: Edit, Delete, Target, Grid

Waypoint [Name]

allows you to view the Waypoints submenu for the waypoint

under your cursor. You can move the cursor onto an existing waypoint and press
the MENU key once, or use

Cursor to Waypoint

to select a waypoint from the

saved waypoints list.

NOTE:

See

Introduction to Navigation

for more Waypoints information.

The Waypoint Submenu contains the following menu options:

Edit

allows you to edit the Name, Position (Latitude and Longitude), and

select the Icon that will be used to represent the waypoint in the Chart
and Combo Views.

Delete

allows you to delete a waypoint from the saved waypoints list.

Target

allows you to apply a target to a waypoint selected from the

saved waypoints list.

Grid

allows you to apply a trolling grid to a waypoint selected from the

saved waypoints list.

Cursor to Waypoint

(Chart or Combo View only)

Settings: Follow screen instructions to activate.

Cursor to Waypoint allows you to quickly move the cursor to any saved
waypoint so that you can locate it or edit it. This X-Press™ Menu option only
appears if you have saved waypoints.

Save Current Track

Settings: Follow screen instructions to activate.

Save Current Track

allows you to save the current track on the display. After

the current track is saved, a new current track is started. Save Current Track
appears on the Navigation X-Press™ Menu after navigation is stopped.

Navigation X-Press™ Menu

Summary of Contents for 581i Combo














































































































Search results

Summary of Contents for 581i Combo

Reviews:

Related manuals for 581i Combo

Brands by name

Popular brands

Humminbird 581i Combo, Operation Manual

Search results

Summary of Contents for 581i Combo

Reviews:

Related manuals for 581i Combo

Brands by name

Popular brands