Humminbird 581i Combo Operation Manual Download Page 108 | Manualshive

Page: 108 / 109

background image

98

Track Line (TRK)

The planned line of travel between two waypoints, and it represents

the most efficient path between the two points because it is a straight line. The TRK is
measured in degrees (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is
West). See

Cross Track Error

and

Course Over Ground

.

Trackplotter

A navigation device that shows Present Position, along with Track, Waypoint,

and Routes, but NO MAP in the background. See

Chartplotter

.

Trolling Grid

A Humminbird® feature that displays a precise reference grid around a

waypoint. This grid is used as a guide pattern for trolling around a specific area to assure a
more efficient and complete coverage of that area.

UTC (Universal Time Constant)

UTC is the “standard time” used in navigation and is

the local time in Greenwich England. (UTC is equivalent to Greenwich Mean Time (GMT)).

WAAS (Wide Area Augmentation System)

WAAS is complementary technology to

GPS that provides enhanced accuracy through correction signals broadcast from Federal
Aviation Administration WAAS satellites stationed over the USA. These secondary signals
are automatically received by the standard Humminbird® GPS Receiver. With WAAS signal,
GPS accuracy is improved to within 3 meters 95% of the time. Outside the United States,
regional governmental coalitions have created similar systems such as EGNOS (Europe) and
MSAS (Japan).

Waypoint

The saved location (latitude, longitude) of a point of interest that is stored in a

GPS receiver’s memory. This can include a marker buoy, dock, fishing hole, or anywhere
else the user may want to return to. Humminbird® products offer the ability to name and
assign a symbol to the saved location. Depth, Date, and Time of Day when the waypoint
was created is also saved.

Waypoint Target

A Humminbird® feature that displays a precise “bull’s eye” around a

selected waypoint. This bull’s eye is used to easily monitor boat position relative to a
waypoint, and is useful for fishing over submerged structure. With Waypoint Targets, a
quick look at the screen lets you know how far off the waypoint the boat has drifted.

Glossary

«
...
106
107
108
109
»

Summary of Contents for 581i Combo














































































































Reviews:

No comments

Related manuals for 581i Combo

Brand: Haiyang Pages: 75

Brand: Raymarine Pages: 2

Brand: Suzuki Pages: 123

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands