Humminbird 541 Operation Manual Download

Page: 36 / 84

The Menu System

The Menu System

The Menu System is divided into easy-to-use menu modules as follows:

•

Start-Up Options Menu:

Press the MENU key during the power on

sequence to view the Start-Up Options Menu. From the Start-Up
Options Menu, you can choose the following Fishfinder Modes:
Normal, Simulator, and System Status.

•

X-Press™ Menu:

The X-Press™ Menu provides a shortcut to the most

frequently-used settings, and the options on the X-Press™ Menu
correspond with the current view.

•

Main Menu:

The Main Menu is a standard set of menu settings which

are organized under the following tabbed headings: Alarms, Sonar, and
Setup.

NOTE:

The X-Press™ Menu(s) and the Main Menu options can also be expanded or

simplified by setting the User Mode to Advanced or Normal (see

Main Menu: User

Mode

Summary of Contents for 541





















































































Search results

Summary of Contents for 541

Reviews:

Related manuals for 541

Brands by name

Popular brands

Humminbird 541, Operation Manual

Search results

Summary of Contents for 541

Reviews:

Related manuals for 541

Brands by name

Popular brands