Choose the Mounting Location
It is important to consider the following information when installing the scanner on the boat. Also, see
Adjust
for Obstacles
for more information.
WARNING!
Do NOT install the radar in a location that exposes passengers and crew to the radar beam. Do NOT mount
the radar where it could radiate on any person.
CAUTION!
Working at higher elevations may become necessary while installing the scanner unit. Observe safety measures
and take sufficient precautions to avoid personal injury or damage to the equipment.
Center Line:
The scanner unit should be mounted on
the center line of your boat in a location that has an
unobstructed view forward and is as clear as possible
the rest of the way around the unit.
Height:
Choose a location as high as practical to
improve maximum range; however, keep in mind that
minimum range objects may be overlooked if mounted
too high.
Unobstructed View:
Position the unit forward of large
structures and exhaust stacks. Large structures or
stacks cause blind spots. Contamination from engine
exhaust on the scanner housing reduces radar
performance.
• Antennas for GPS, radio communication, or other
equipment should not be located in the radar
beam.
• Use non-metallic extension poles to move the
active area of antennas above the radar beam.
Continued on next page...
Center line
of boat
4
Installation
Humminbird_Radar_Manual_531986-1EN_A.qxp:Layout 1 9/19/11 4:37 PM Page 4
