6
Humminbird user guide - V1b.docx
If you want to navigate to an existing waypoint there are various ways to do this.
The simplest option is to use the “GOTO” key – if you
are in “cursor” mode (see below) this will create a
waypoint at the cursor position and start navigation
towards it.
Use the cursor control key to move the cursor to where you want to go and press
“GOTO”
If cursor mode is not active (i.e.
if you have the chart displayed
and haven’t touched the cursor
buttons) then pressing the
GOTO key displays the list of
saved waypoints and you can
select the one you want
