Humidex
9
Attaching the Flex, Pipe and Vent
Attach the flex to the vent with the provided screws.
From the outside, push the flex through the 6 ¼”
hole.
Make sure the vent is not twisted by inserting the
screws too tight and that the flaps are working
properly. Attach the vent to the outside wall with the
provided screws
From the inside measure the distance between the
elbow and the flex.
Cut off the excess flex.
If this is
not done, the
efficiency of the unit will diminish
drastically.
Summary of Contents for HDS-103
Page 17: ...Humidex 16 HDS 103S HDS 209S ...
