‐
Do NOT wash the watch with household cleanser. Please use soapless detergent, rinse
thoroughly and wipe with a soft towel ornapkin.
‐
While the watch is water resistant, wearing a wet band is not good for your skin.
‐
If your bands get wet—for example after sweating or showering—clean and dry them
thoroughly before putting them back on your wrist.
‐
Be sure your skin is dry before you put your bands back on.
‐
Do not bring your device into contact with any sharp objects, as this could cause scratches
and other damage.
‐
For light-colored arm bands, minimize direct contact with dark-colored clothing, as color
transfer canoccur.
Getting Started
What’s in the box
•
Smart watch (IW2, IW3 with bands)
•
Charging cable
•
User manual
•
Quick start guide
What’s in this document
This manual gets you started quickly with setting up your watch. Setup ensures that your watch
can synchronize its data with the Letsfit app, where you can get detailed information on your
stats, view historical trends, log sleep, and more. As soon as setup is complete, you’re ready to
start moving. The remainder of the manual walks you through every function on your IW2, IW3.
Setting up Your Watch
Charging your watch
Please fully charge your watch before initial use.
1. Insert the USB plug of the charging cable into the USB port on your computer or a UL-certified
USB wall charger.
2. Hold the other end of the charging cable near the port on the back of the watch until it
attachesmagnetically.
3. Make sure the pins on the charging cable lock securely with the port. The connection is secure
when the watch vibrates and the battery icon with percent charged appears on the screen.
When the watch shows that the battery is low, connect the watch to a USB port with 5V-500mA.
While the watch charges, there is a battery progress bar on the screen and you can check the
battery level at any time.
