manualshive.com logo in svg

Humboldt IW2, User Manual

Share
Download
Humboldt IW2 User Manual Download Page 16

1. Swipe the screen of the watch, and tap "Timer" in the function list to enter the setting
interface.
2. Choose the countdown time or customize your timer.

Basic Specifications

Model No.: IW2,IW3
Sync: Bluetooth 5.0
Screen: 1.4" TFT LCD
Battery Capacity: 250mAh
Working Voltage: 5V-500 mA
Working Temperature: -10

℃

to 40

℃

Weight: 1.34oz (38g)
Waterproof Rating: IP68
Working Time: about 10 days

FAQs
Failure to pair the watch with the Letsfit app on your smartphone again

● Swipe the screen of watch and tap "Settings" to enter settings mode. Tap "System Menu" and
choose "Factory Reset". The information on the watch will be reset and the watch will be
restarted.
● Use the Letsfit app to scan the QR code displayed on your watch to pair.
If you still fails to connect the watch to the app, please kindly take the following steps:
1. Make sure your smartphone’s Bluetooth is enabled and make sure the watch is not connected
to other smartphones.
2. Search this device in the app to pair (Go to the "Settings" page → "+ Pair new device" → "IW2,

IW3"

→ tap "Search Devices").
3. Make sure the distance between your smartphone and the watch does not exceed 0.5 meters
and keep the watch screen always on when pairing.

Occasional failure to connect with Bluetooth

Reboot your smartphone or restart your smartphone’s Bluetooth.

Failure to receive SMS / calls notifications

Calls / SMS notification function works when the watch connects to your smartphone via the app.
Please kindly refer to the following tips:
1. Go to your smartphone Settings, find Letsfit app, enable the Location and all Notifications.
2. Enable your phone’s Bluetooth and go to the Letsfit app to pair the watch.
3. Open the app. Go to the "Settings" page

→

"IW2, IW3"

→

"Notification alerts",

turn on "Notification alerts".
4. Make sure the "Do not disturb" function is not enabled in the app or the watch.

The watch is disconnected from the Letsfit app on your smartphone

The watch will disconnect from your smartphone in the following cases:
1. Smartphone Bluetooth is off or exceeds the Bluetooth connection range (the maximum

Summary of Contents for IW2




















Reviews:

No comments

Brands by name

Popular brands

Load more brands