REXUS operating instruction manual (Part 2)
Version 2019/01
11
6.2.4 Barred tie rail
1
2
3
Barred tie rail with inserted round locking bar
1. Ramp wall
2. Barred tie rail
3. Round locking bar
Operating the round locking bar
Removing the round locking bar
►
►
Press the locking bar together so that the end journals are
disengaged from the tie rail.
►
►
Carefully guide the other end journals out of the tie rail.
►
►
Swivel the locking bar slightly upwards or to the side so
that it does not damage the interior walls.
►
►
Place the locking bar horizontally in a place secure
from damage - not in the danger area (work zone).
Positioning end journals
►
►
Place the end journals on the bar.
►
►
Ensure that the locking bar sits flush.
The locking bar is installed and secured.
6.2.5 Motorcycle stand
1
2
3
Motorcycle stand mounted on the cargo bed
1. Motorcycle stand
2. Screws
3. Cargo bed
►
►
Position the motorcycle stand according to the size of
your motorcycle and align it as centrally as possible.
Please take note of the motorcycle stand manufacturer's
mounting instructions! Use the fastening elements
supplied or insert suitable screws.
►
►
Check the screws of the motorcycle stand so that no lines
are damaged under the chassis.
►
►
If possible, screw the motorcycle stand into a lateral
bracing.
The motorcycle stand must be screwed safely and
securely! If necessary, have the motorcycle stand
installed in a specialist workshop.
Tying -down motorcycles
Motorcycle in motorcycle stand
►
►
Centrally position the motorcycle on the motorcycle stand.
- Where necessary, first adjust the motorcycle stand.
►
►
Use suitable tie-down straps to tie down the motorcycle
to the floor at the 4 tie-down points.
Observe the motorcycle stand manufacturer’s instruc-
tions and those of the motorcycle manufacturer.
