FTK Operating Instruction Manual (Part 2)
Version 2019/01
13
6.7 Unloading the trailer
Automatic lowering of the load platform!
Crush hazard for persons caused by the rear un-
derride guard when lowering the load platform.
►
►
Keep persons away from the area around the
underride guard during lowering.
Moving load platform!
You could fall if you step onto the load platform
during the loading and unloading process and
during automatic movement.
►
►
Take particular care when stepping onto the load plat-
form.
►
►
Wear
.
Make sure that the trailer is secured so
that it cannot roll away.
►
►
Make sure that road traffic safety is not impaired
when loading and unloading the trailer.
►
►
If necessary, use additional signalling devices,
e.g. signs, barriers.
1
2
Drive-up ramps positioned for unloading
1. Underride guard
2. Drive up ramp
WARNING
6.7.1 Unloading the vehicle
Unloading process (example)
1. Drive up ramp
2. Underride guard
►
►
Make sure that the vehicle to be unloaded is secured
from rolling away. (Handbrake applied)
►
►
Remove the drive-up ramps.
Adjust them to the correct track width.
►
►
Release all the car lashing straps and stow them away.
►
►
Open the interlocks on the load platform.
►
►
Slowly move / drive the vehicle to be unloaded down.
Make sure that the drive-up ramps do not slip away and
that the wheels on the vehicle to be unloaded drive cen-
trally up the ramps.
►
►
Place the drive-up ramps and lock them with the inter-
locks.
►
►
Push the load platform down at the front edge of the
load platform and secure the load platform with the
eccentric clamping locks.
