Humbaur 10000 Series, Operating Instructions Manual

Page: 174 / 230

7
Lubrication
172 Inspection, care and maintenance
Tilting bearings
Pic. 25 Tilting bearing ball
1 Tilting bearing ball, welded on
The tilting bearings must be regularly
inspected for dirt accumulation and wear
and lubricated, depending on the level of
use and operating environment of the
trailer.
A visual inspection and, where
required, cleaning and
lubrication of the tilting bearings
must be carried out at least
every 6 months.
Pic. 26 Tilting bearing open
1 Tilting bearing cup
2 Roller

Tip the cargo bed to the right and left.

Carry out a visual inspection.

Remove any dirt particles such as
sand, twigs, etc.

Clean the tilting bearing ball
(Pic. 25 /1), the tilting bearing cup
(Pic. 26 /1) and the roller (Pic. 26 /2)
with a clean cloth.

Check the roller for cracks.
Exchange the roller as required.

Grease the tilting bearing ball
(Pic. 25 /1).
Pic. 27 Tilting bearing secured
1 Roller
2 Plug pin inserted and secured

Grease the plug pin (Pic. 27 /1).

Tip the cargo bed to the right and left.

Check that the tipping process is
functioning correctly.
W - 021
1
W - 022
1
2
W - 023
2
1