5
Tipping the body
Operating the body
119
Starting to tilt
Pic. 40
Valve lever in the driver's cab
1
LOWERING (driving position)
2
RAISING (tilting the tipper box)
Unlatch the valve lever from its Stop
position.
Gently move the valve lever into
Position 2.
The further the valve lever is pressed,
the higher the speed.
Release the valve lever once the
tipping position has been reached.
The valve lever automatically returns
to the STOP position.
Initiating the lowering
Pic. 41
Valve lever in the driver's cab
Unlatch the valve lever from its Stop
position.
Gently move the valve lever into
Position 1.
The further the valve lever is pressed,
the higher the speed.
Wait until the cargo bed has fully been
lowered onto the chassis.
Switching off the hydraulic pump
Pic. 42
Switching off the auxiliary drive
Uncouple the main drive of the towing
vehicle while the engine is running.
Switch off the auxiliary drive.
Slowly couple in the main drive of the
towing vehicle.
The towing vehicle is ready to drive.
Use the rear view mirror to check
again that the body is lowered.
A - 028
S
T
O
P
1
2
A - 029
S
T
O
P
1
2
A - 030
Summary of Contents for 10000 Series
