Top features
Commands are
accessed through the
Application Menus by
pressing the F4 key.
Commands are
accessed through the
Application Menus by
pressing the F4 key.
Geographical Where
am I:
Provides informa-
tion on your current
location.
Repeat message
Repeats the last
geographical message.
Get GPS information
Press F2 to learn the
number of satellites in view,
quality of GPS reception,
speed and altitude.
Record a Point of Interest (POI)
Trekker allows you to mark any location as a personal point of interest.
To create a personal POI, you need to be in an open-air area and
online.
1. Press the Record button.
2. After the beep, dictate a short audio message. The recording option
will stop automatically after 4 seconds. After 2 beeps, you should hear
the messages, "Recording stopped", and "POI created".
Switching navigation modes
Trekker automatically provides the available information in Pedestrian
mode.
If you walk into an area such as a park where no streets are available,
the system will automatically switch to Free mode.
To use Trekker in a vehicle, toggle between the Pedestrian Mode and
Motorized mode by Pressing and Holding the Home button.
To navigate virtually a map, switch to Browsing mode by pressing and
holding the End button to toggle ON or OFF.
Navigation modes are also available from the Trekker Application
menu. To learn your current Navigation mode, press Shift+F3.
