HumanTechnik 10411100, User Manual

Page: 29 / 99

Akkuladung
1. Move the On/Off switch of the receiver to the OFF
position.
2. Place the receiver in the transmitter, make sure
that the charge contacts touch the charge pins of
the transmitter.
3. The charging process starts automatically. The
LED indicator for the main battery will glow red.
After a completed charge (approx. 2 hours), the
indicator will glow green.
4. A spare battery is provided for extended use.
To charge it, insert the spare battery in the spare
charging slot. The LED indicator for the spare bat-
tery will glow red. After a completed charge
(approx. 2 hours), the indicator will glow green.
Warning:
The batteries (as provided) must not be exposed to excessive heat such as direct sunlight,
fire or similar. Never use other types of battery or non-rechargeable batteries to replace the
rechargeable batteries supplied. When the devices are not in use, switch them off to avoid
damage to the batteries.
The batteries must always be fully charged before their first use. An initial 3 hours charge
is required to guarantee an acceptable service life for the rechargeable batteries. Always
ensure that the headset receiver is switched to the OFF position while the batteries are
charging.
Important:
This unit should only be operated with the provided special rechargeable batteries. When
replacing the batteries or when disposing of the unit, always comply with the applicable
laws relating to the disposal of batteries. Please place them in a proper disposal container
to ensure that they are eliminated safely and in an environmentally friendly way.
English 29
Tiviton_DAB.indd 29 13.12.2018 14:26:05